Search
  1. Home
  2. Stainless Steel
  3. Stainless Steel Hot Rolled No.1 Coil

Stainless Steel Hot Rolled No.1 Coil

Stainless Steel Hot Rolled No.1 Coil

The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance.

Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.

Chemical Composition

Steel Grade
  • 304 Steel Grade - C%
  • 0.08%
  • 304 Steel Grade - Cr%
  • 18.0~20.0%
  • 304 Steel Grade - Ni%
  • 8.0~10.5%
  • 316 Steel Grade - C%
  • 0.03%
  • 316 Steel Grade - Cr%
  • 16.0-18.0%
  • 316 Steel Grade - Ni%
  • 12.0-15.0%

Product Specification and Size :

Product Specification and Steel Grade

  ASTM JIS AISI EN Mill's Standard
Specification A240
SA240		 G4304
G4312		   10088-2
17224, 17440 ,17441		 0.00328
Grade

S30400
S30403
S31603
S43000

S44400

SUS304
SUS304L
SUS316L
SUS430

SUS444

304
304L
316L
430

444

14301
1.4306
1.4401
1.4016

1.4521

 201
202
204Cu3

Available Size

Width Thickness Inner Diameter Available Steel Grade
610~2000 mm 2.5~10.0 mm 610 +0/-5 mm 201, 202, 304, 304L, 316L

Application

Stainless steel has good processing performance and weldability. It is suitable for food processing, storage and transportation, and it can be applied to water heaters, boilers, bathtubs, auto parts (windshield wipers, muffler and molded products), medical equipment, building materials, chemical, food industry, agriculture, marine components, and so on.

stainless steel kitchen equipment
stainless steel building materials

Unit Weight Limitation

Unit : ton 3 feet 1M 4 feet 5 feet
300 series 3~17 3~18 3~22 3~23 (≦5.0) / 27 (>5.0)
300 series - - 3~22 -
Remark Both Cut Edge and Mill Edge are available

Dimension and Shape Tolerance

Thickness Tolerance
Thickness 3 feet 1M / 4 feet 5 feet
2.00~2.49 ±0.05 mm ±0.06 mm -
2.50~3.14 ±0.06 mm ±0.07 mm ±0.09 mm
2.50~3.14 ±0.07 mm ±0.08 mm ±0.10 mm
2.50~3.14 ±0.08 mm ±0.09 mm ±0.11 mm
* Aim Tolerance = 1/2 (lower limit + upper limit)

Width Tolerance: Mill Edge: Aim ±10 Cut Edge : Aim -0 / +1

Camber : Max. 5 mm / 2M

Telescope & Protruding Wraps: Mill Edge: 50 mm
Cut Edge: 30 mm

Edge Crack: Mill Edge: Max. 5 mm per side
Cut Edge: Not Allowed

Chemical Composition & Mechanical Property :

Chemical Composition

JIS Specification
Spec JIS
G4303
G4304
G4305
G4312
Steel Grade C% Max. Si% Max. Mn% Max. P% Max. S% Max. Cr% Max. Ni% Max. Mo% Max. Ti% Max. Other
SUS 304 0.08 1.0 2.0 0.045 0.03 18.0~20.0 8.0~10.5 - - -
SUS 304L 0.03 1.0 2.0 0.045 0.03 18.0~20.0 9.0~13.0 - - Cu:1.0~3.0
SUS 316L 0.03 1.0 2.0 0.045 0.03 16.0~18.0 12.0~15.0 2.0~3.0 - -
SUS 430  0.12 0.75 1.0 0.04 0.03 16.0~18.0 - - - -
ASTM Specification
Spec
ASTM
A240
Steel Grade C% Max. Si% Max. Mn% Max. P% Max. S% Max. Cr% Max. Ni% Max. Mo% Max. Ti% Max. Other
S30400 0.08 0.75 2.0 0.045 0.03 18.0~20.0 8.0~10.5 - - N:0.1Max
S30403 0.03 0.75 2.0 0.045 0.03 18.0~20.0 8.0~12.0 - - N:0.1Max
S31603 0.03 0.75 2.0 0.045 0.03 16.0~18.0 10.0~14.0 2.0~3.0 - N:0.1Max
S43000 0.12 1.0 1.0 0.04 0.03 16.0~18.0 0.75 Max - - -

Mechanical Property

JIS Specification
Spec JIS
G4303
G4304
G4305
G4312
Steel Grade N/mm 2 MIN.
Tensile Stress		 N/mm 2 MIN.
Proof Stress		 Elongation MIN. HRB MAX. Hardness Bendability:Bending Angle Bendability:Inside Radius
S304 520 205 40 90 No Require -
S304L 480 175 40 90 No Require -
S316L 480 175 40 90 No Require -
SUS430 450 205 22 88 180° 1.0 time the thickness
ASTM Specification
Spec.
ASTM
A240
Steel Grade N/mm 2 MIN.
Tensile Stress		 N/mm 2 MIN.
Proof Stress		 Elongation MIN. HRB MAX. Hardness Bendability:Bending Angle Bendability:Inside Radius
S30400 515 205 40 92 No Require -
S30403 485 170 40 92 No Require -
S31603 485 175 40 95 No Require -
S43000 450 205 22 89 180° -