Aluminum Tread Plate

Aluminum Tread Plate

The advantage properties of aluminum alloy have light weight, excellent electrical and thermal conductivity, highly corrosion resistant and ductility.

Aluminum alloy is soft and are usually alloyed with copper, zinc, magnesium, silicon, manganese and lithium to increase strength. Aluminum alloy is exposed to air that instantly forms an anti-oxidant coating to protect products. Aluminum alloy is one of the lightest metals, the application of products ranges from precision technology to daily commodities.

Mechanical Properties

Steel Grade 5xxx Series
  • Yield Strength
  • ≥200~380Mpa
  • Tensile Strength
  • ≥185~345Mpa
  • Hardness
  • 53~100HB

Product Specification and Size :

- Standard Specification: GB/T 3618, Base material conforms to GB/T 3880

Alloy and Temper
Alloy Temper Remarks
1xxx:1050, 1060, 1100 O, H114, H194 H114 fabricated from Temper O H194 fabricated from Temper H18 ★Temper H12, H14, H22, H24, H32 and H34, which are applied to base material are provided as per client’s request and mutually agreed.
3xxx:3003, 3105
5xxx:5052, 5754 O, H114

Alloy designation (For Reference)

Comparison of Alloy Designations for Aluminum flat Products

Alloy Series Chinese Standard American Standard European Standard
1xxx Series 1050 - -
1060 1060 -
1100 1100 -
3xxx Series 3003 3003 EN AW-3003
3105 3105 EN AW-3105
5xxx Series 5052 5052 EN AW-5052
- 5754 EN AW-5754

Temper designation (For Reference)

Temper Definition
O Annealed
H114
H194
H114 fabricated from Temper O
H194 fabricated from Temper H18
Temper H12, H14, H22, H24, H32 and H34, which are applied to base material are provided as per client’s request and mutually agreed.

Available Size Range

Dimension Thickness Width Length
Range 1.5 ~ 4.5mm 1,000 ~ 1,600mm 2,000 ~ 4,000mm

- Surface Finish: Bright finish, Mill finish
- Pattern Type: Small Five Bar, Big Five Bar, Diamond
- Raised Pattern:

Pattern Type Small Five Bar Big Five Bar Diamond
Pattern Height 1.0mm, +/-0.4mm 1.0mm, +/-0.4mm 1.0mm, +/-0.4mm
Pattern Length 35mm, +/-3.0mm 45mm, +/-3.0mm 33mm, +/-2.0mm

Application

Aluminum and aluminum alloy tread sheet is a high-cost modern materials, aluminum and aluminum alloy tread sheet can widely applied in flooring, wall panel, tool box, transportation and other architecture.

Type Application
Construction Curtain walls, cladding, ceiling, heat insulation and venetian blind block, etc.
Transportation Automobile parts, bus bodies, aviation and ship-building and air-cargo containers, etc.
Electronic Appliance Electrical appliances, telecommunication equipment, PC board drilling guide sheets, lighting and heat radiating materials, etc.
Consumer Goods Parasols and umbrellas, cooking utensils, and sports equipment, etc.
Other Military, color coated aluminum sheet

Chemical Composition

Chemical Composition conforms to Chinese, American and European standard specification (For Reference)

Alloy Si Fe Cu Mn Mg Cr Zn Ti Others:Each Others:Total Al:Min.
1050 0.25 0.40 0.05 0.05 0.05 - 0.05 0.05 0.03 - 99.50
1050A 0.25 0.40 0.05 0.05 0.05 - 0.05 0.03 0.03 - 99.50
1060 0.25 0.35 0.05 0.03 0.03 - 0.05 0.03 0.03 - 99.60
1100 0.95 Si + Fe 0.05~0.20 0.05 - - 0.1 - 0.05 0.15 99.0
3003 0.60 0.70 0.05~0.20 1.0~1.5 - - 0.25 0.15 0.05 0.15 remainder
3105 0.60 0.70 0.03 0.3~0.8 0.2~0.8 0.2 0.40 0.10 0.05 0.15 remainder
5052 0.25 0.40 0.10 0.10 2.2~2.8 0.15~0.35 0.10 - 0.05 0.15 remainder
5754 0.40 0.40 0.10 0.50 2.6~3.6 0.30 0.20 0.15 0.05 0.15 remainder