Product Specification and Size :

Standard Specification: GB/T 6892, ASTM B221, EN754, EN 755

Alloy and Temper
Alloy	Temper
5xxx: 5083	O, H112
6xxx: 6005, 6060, 6061, 6063, 6082,6463	T5, T6, T66

Alloy Designation (For Reference)

Comparison of Alloy Designations for Aluminum Products

Alloy Series	Chinese Standard	American Standard	European Standard
5xxx Series	5083	5083	EN AW-5083
6xxx Series	6005	6005
	6060	6060	EN AW-6060
	6061	6061	EN AW-6061
	6063	6063	EN AW-6063
	6082	6082	EN AW-6082
	6463	6463	EN AW-6463

Temper Designation (For Reference)

Temper	Definition
O	Annealed
H112	Slightly strain harden from working at an elevated temperature or from limited amount of cold work
T5	Cooled from an elevated temperature shaping process and then artificially aged
T6	Solution heat-treated and then artificially aged
T66	Solution heat-treated and then artificially aged - mechanical property level higher than T6 achieved through special control of the process (6000 series alloys)

Available Size Range

Dimension	Range
A	10mm~200mm
B	10mm~200mm
T	2mm~15mm
Length	1,000~6,000mm

Application

Aluminum angles are used in numerous industrial applications, including scaffolding, shipbuilding, transmission towers and furniture applications.

- Production Process: Extruded
- Form & Image: Equal Angle, Unequal Angle
- Surface Finish: Mill Finish, unless otherwise specified
- Surface Protection: Paper interleaved

Chemical Composition

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others: Each	Others: Total	Al: Min.
5083	0.40	0.40	0.10	0.40~1.0	4.0~4.90	0.05~0.25	0.25	0.15	0.05	0.15	remainder
6060	0.30~0.60	0.10~0.30	0.10	0.10	0.35~0.60	0.05	0.15	0.10	0.05	0.15	remainder
6061	0.40~0.80	0.70	0.15~0.40	0.15	0.80~1.20	0.04~0.35	0.25	0.15	0.05	0.15	remainder
6063	0.20~0.60	0.35	0.10	0.10	0.45~0.90	0.10	0.10	0.10	0.05	0.15	remainder
6082	0.70~1.30	0.50	0.10	0.40~1.0	0.60~1.20	0.25	0.20	0.10	0.05	0.15	remainder
6463	0.20~0.60	0.15	0.20	0.05	0.45~0.90	-	0.05	-	0.05	0.15	remainder