1. Recycling of Aluminum Sheet is made of electronics factory scrap or surplus of PC sheet products. The surface of these products has glue and the burnout rate of smelting processes around 80-85%.
2. Product properties are equivalent to aluminum alloy 1050 and 1100.
3. The packaging includes bulk packaging, bundle packaging, and pallet packaging.

1. Recycling of Clean Aluminum Sheet is made of electronics factory scrap or surplus of PC sheet products. The surface of these products has no glue and the burnout rate of smelting processes around 90-95%.
2. Product properties are equivalent to aluminum alloy 1050, 1100.
3. The packaging includes bulk packaging, bundle packaging, and pallet packaging.

1. The product is made of scrap or surplus from the aluminum cutting factory, as the recycled material directly.
2. The thickness of the product is thicker than other products.
3. The burnout rate of smelting processes around 97-99%.
4. The packing mode is mainly pallet packaging, which is divided into with or without slip sheets.

1. The product comes from the dealer who collects the lithographic sheets or presensitized plates (PS-plates) and resells it.
2. The packing mode is mainly pallet packaging.

The product is usually made out of copper or aluminum from cooling fins.

Aluminum used beverage can (UBC) is a packaging container made primarily of aluminum.

The material consists of one aluminum alloy (alloy 6063). The impurity rate can be close to 2% after filtration and purification.

1. The most common sources are aluminum gutters, window frames, automobile parts, alloy wheels, engine pistons, section steel, extrusion (aluminum block scrap), aluminum puck, and equipment parts.
2. Type: Telic, Puck, Scrap

The recycled copper has a number of applications quite similar to the virgin material, as copper does not lose its essential properties when recycled.

Aluminum Telic is made of aluminum shavings and the oil-water ratio is around 6%.

1. The material consists of one aluminum shavings, including 1 series, 3 series, 5 series, 6 series, but excluding 7 series and 8 series.
2. Aluminum Telic is made of aluminum shavings and the oil-water ratio is around 6%.

The material consists of 1000 series water tank (heat sink). The oxidation phenomenon and impurity rate are quite low after the process of crushing, filtering and dust collecting.