| |
 |
|
|
Click here to view steel products information in detail |
|
|
|
|
|
 |
|
|
|
Home > Steel Products > Coated Steel |
 |
Coated Steel |
 |
 |
 |
 |
 |
|
|
 |
GI (Zinc Coated Steel)
Hot-Dip Galvanized Steel Coils (Zinc Coated)
Hot-Dip Galvanized Steel Sheet / Strip |
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
Hot-Dip Galvanized Steel Coils JIS 3302
Thickness of Base Steel (mm): 0.15~4.50
Coating Mass:
- Regular Spangle: Z08~Z45
- Minimized (ZERO) Spangle: Z08~Z35
- Galvannealed: F10, F12, F18
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - Hot-Dip Galvanized Steel Coils ASTM A653M / A924M
Thickness of Base Steel (mm): 0.15~4.50
Coating Mass:
- Regular Spangle: Z120~Z450
- Minimized (ZERO) Spangle: Z120~Z350
- Galvannealed: ZF120, ZF180
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - -
Surface Finish
Regular Spangle, Minimized Spangle, Extra Smooth and Galvannealed
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - -
Surface Treatment
Chromating Treatment, Oiled or Resin Coated (Anti Finger Print)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - -
Coating Thickness
Min. Single Side coating Thickness: 50 g/㎡
Max. Single Side coating Thickness: 225 g/㎡
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - -
Remark
1. Tolerance for thickness, width, flatness and so on… can
conform to the requirements of JIS G3302 or ASTM A653M /
A924M.
2. All products with thickness 2.0mm and under can be skin
passed.
3. The specification for thicknesses under 1.6mm for hot-rolled
base metal according to JIS G3302 will be the same as for
thickness 1.6mm and over.
4. Coil inside diameters can be either 508mm or 610mm, maximum
coil outside diameter is 2000mm. Weight of a single coil can be
from 5 to 30 metric tons.
5. Please contact Yieh Corp. for Special specifications.
6. The specification of ASTM such as A653M, A792M, A875M /
A924M and etc. have been updated to the latest revisions.
|
|
|
|
|
Acceptable Order Range for Cold rolled Base Steel:
Thickness: 0.20 mm / Width: 800~950 mm
Thickness: 0.23 mm / Width: 800~1220 mm
Thickness: 0.34 mm / Width: 800~1415 mm
Thickness: 0.40~1.50 mm / Width: 800~1534 mm
Thickness: 1.60~1.75 mm / Width: 800~1300 mm |
|
Acceptable Order Range for Hot Rolled Base Steel:
Thickness: 2.0~4.0 mm
Width: 800~1280 mm |
|
Subject to Prior Negotiation:
Thickness: 0.15 mm / Width: 700~950 mm
Thickness: 0.20~1.50 mm / Width: 700 mm
Thickness: 1.60~1.75 mm / Width: 700 mm, 1400~1534 mm
Thickness: 2.0~4.0 mm / Width: 500~700 mm |
|
|
|
CGI:
Coating Mass: Z08~Z27
Thickness (mm): 0.2~2.0
Width (mm): 30~1824
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - -
HGI:
Coating Mass: Z08~Z27
Thickness (mm): 1.2~4.5
Width (mm): 30~1824 |
|
|
|
 |
 |
 |
|
|
|
|
|
| No 6, E-Da Road, Yanchao Township, Kaohsiung County, Taiwan, 82445 R.O.C. │ Tel : +886-7-615-1000 │ Fax : +886-7-615-3000 |
| Copyright (c)2009 Yieh Corp.. All rights reserved │ mail : ec@yieh.com |
|
|
|